60W LED Driver Power Supply

Frequently Asked Questions

1. What accessories do I require for a basic installation and how do I connect them?

For a general 12V Indoor Power Supply installation, you would require:

• 1 × 12V Indoor DC Power Supply
• 1 × Compatible 12V LED Strip Light or other 12V LED product
• Suitable mains input cable
• Suitable low-voltage output cable

Depending on your application, you may also require a switch, dimmer, controller, connectors, or other installation accessories.

See the installation diagram for guidance on the correct connection method.

2. Are there any other items or optional extras that I may need?

Depending on your application, you may also need:

• 12V LED Strip Lights
• Insulated 2-Core Flex for low-voltage connections
• 2-Core Wire Connectors or Terminal Blocks
• LED Dimmer or compatible Controller
• Mounting screws, brackets, or clips
• Soldering supplies and heat shrink tubing
• Additional cable for longer cable runs

3. What Voltage Power Supply would I use?

Always use a Power Supply with the same voltage as the LED product being powered.

For a 12V LED Strip Light:

12V LED Strip Light → 12V DC Power Supply

Never connect a 12V LED product directly to 230V AC mains power.

4. What size Power Supply would I need?

Calculate the required power based on the total wattage of the connected LED products.

A general calculation is:

Total Load (Watts) + 20% Spare Capacity = Recommended Power Supply Size

Example:

5M × 10 Watts/M = 50 Watts
50 Watts + 20% = 60 Watts

Therefore, a 60W 12V Power Supply would be suitable for this example.

For additional headroom and long-term reliability, a slightly larger correctly rated power supply can be selected.

5. Where can I use a 12V Indoor Power Supply?

12V Indoor Power Supplies are suitable for a wide range of low-voltage indoor lighting applications, including:

• LED Strip Lights
• Cabinet and cupboard lighting
• Display and shelving lighting
• Signage and illuminated features
• Architectural and accent lighting
• Furniture and joinery lighting
• Residential lighting projects
• Commercial and retail installations
• DIY LED lighting projects

Always ensure the connected product is compatible with a 12V DC output.

6. Can I install a 12V Indoor Power Supply myself?

The low-voltage 12V DC side of the installation can be relatively straightforward when using compatible components.

However, connecting the Power Supply to 230V AC mains electricity involves potentially dangerous voltages and should be completed in accordance with local electrical regulations. If you are unsure about mains wiring, consult a qualified electrician.

7. Can I use a 12V Indoor Power Supply with LED Strip Lights?

Yes. A 12V Indoor Power Supply can be used to power compatible 12V LED Strip Lights, provided the total wattage of the strip does not exceed the rated output of the Power Supply.

Always check the voltage and wattage requirements of the LED Strip Light before installation.

8. Can I use a dimmer or controller with the Power Supply?

Yes. A compatible 12V LED dimmer or controller can be used where supported by the connected LED product.

The dimmer or controller should be installed on the 12V DC output side of the Power Supply and must be correctly rated for the total connected load.

9. Can I use the Power Supply for other 12V LED products?

Yes, provided the product requires a 12V DC input and its total power requirements are within the rated capacity of the Power Supply.

Always check the specifications of the connected product before installation.

10. How do I know which Power Supply wattage I need?

First, determine the total wattage of all the LED products that will be connected to the Power Supply.

For example:

Total LED Load = 80W
Recommended capacity with 20% spare = 96W

In this case, you would select the next suitable Power Supply rating above 96W.

Avoid operating a Power Supply continuously at or above its maximum rated capacity.

11. How should the Power Supply be installed?

Install the Power Supply in a clean, dry and well-ventilated indoor location.

Ensure that:

• The ventilation openings are not obstructed
• The unit is securely mounted
• It is kept away from excessive heat and moisture
• The connected load does not exceed the rated capacity
• All electrical connections are secure and properly insulated
• Suitable cable is used for both input and output connections

12. Can I shock myself?

The 12V DC output side of the Power Supply is low voltage, so the risk of a dangerous electric shock is significantly lower than with mains electricity under normal conditions.

However, the 230V AC input side is dangerous and can cause serious injury or death.

Always ensure the mains supply is isolated before working on the input side of the Power Supply. Mains electrical connections should be carried out by a suitably qualified person where required.

13. Can I use the Power Supply continuously?

Yes. A correctly sized 12V Indoor Power Supply can be used for continuous LED lighting applications, provided it is operated within its specified electrical and environmental ratings.

For best performance and longevity, avoid overloading the Power Supply and ensure adequate ventilation.

14. Can I use a larger Power Supply than I need?

Yes. Using a Power Supply with a higher wattage rating than the calculated load is generally acceptable, provided the output voltage remains 12V DC and the Power Supply is suitable for the application.

A larger Power Supply does not force additional power into the LED product. The connected LED load draws the power it requires.

However, there is no need to excessively oversize the Power Supply. Select a suitable rating with reasonable spare capacity.

15. What happens if I overload the Power Supply?

Operating a Power Supply above its rated capacity can cause excessive heat, voltage instability, protection shutdowns, reduced performance, or premature failure.

Always calculate the total connected load and select a Power Supply with sufficient capacity and approximately 20% spare capacity.

16. What happens if I connect the wrong voltage?

The voltage must match the requirements of the connected LED product.

A 12V LED product should only be connected to a 12V DC Power Supply. Using an incorrect voltage can cause malfunction, damage the LED product, or create a safety risk.

Always check the voltage specifications before making any connections.