Loading...

* Actual products may vary slightly due to continuous design enhancments.

Essential Components

Essential Components for an LED Strip Light Quick Connector Installation

To make a quick, secure connection, you'll need:

  • LED Strip Light – Compatible 8mm LED strip.
  • LED Strip Quick Connector – Provides a solder-free connection.
  • Power Cable – Suitable red and black wiring for connecting to the power supply.
  • Compatible LED Power Supply – Provides the correct voltage for your LED strip.
  • Wire Cutters – For preparing cables if required.

Important: Ensure the connector matches the LED strip width (8mm) and thickness (1.6mm). Always check polarity and compatibility before connecting power. Switch off the power supply before installation.

LED Strip Light Corner Connector

For Use On LED Strip Light

Online Price:
Original price was: R12.00.Current price is: R11.00. Vat Incl.

Unit: Each
Voltage12V & 24V DC
Cable ColourN/A
Max Width8mm
LensClear Lens
Warranty1 Year

67 in stock (can be backordered)

What Power Supply Do I Need?

Essential Components for an LED Strip Light Quick Connector Installation

To make a quick, secure connection, you'll need:

  • LED Strip Light – Compatible 8mm LED strip.
  • LED Strip Quick Connector – Provides a solder-free connection.
  • Power Cable – Suitable red and black wiring for connecting to the power supply.
  • Compatible LED Power Supply – Provides the correct voltage for your LED strip.
  • Wire Cutters – For preparing cables if required.

Important: Ensure the connector matches the LED strip width (8mm) and thickness (1.6mm). Always check polarity and compatibility before connecting power. Switch off the power supply before installation.

Frequently Asked Questions – LED Strip Light Quick Connector

1. What accessories do I require for a basic installation and how do I connect them?

For a basic installation, you will require:

  • 1 × Compatible 8mm LED Strip Light
  • 1 × LED Strip Light Quick Connector
  • 1 × Suitable Red and Black Power Cable
  • 1 × Compatible LED Power Supply

Open the connector, insert the LED strip so that its copper contact points align with the connector contacts, and close it securely. Connect the red and black wires to the correct positive (+) and negative (–) terminals. Connect the wiring to a compatible LED power supply.

2. Are there any other items or optional extras that I may need?

Depending on your installation, you may need:

  • LED Power Supply – To provide the correct voltage for your LED strip.
  • Additional Electrical Cable – For extending the connection to your power supply.
  • Wire Cutters – For preparing and trimming cables.
  • Mounting Clips or Aluminium Profiles – For securing the LED strip neatly.
  • Cable Clips or Ties – For organising and securing wiring.

3. What power supply should I use?

The power supply must match the voltage requirements of your LED strip light, such as 12V or 24V.

The quick connector does not regulate voltage or provide power. It simply creates an electrical connection between the LED strip and the wiring.

Always ensure that your power supply is suitable for the LED strip's voltage and total wattage.

4. Do I need to calculate the power supply size?

Yes. Unlike a complete plug-and-play lighting kit, the power supply must be selected according to the LED strip's voltage and power consumption.

Calculate the total wattage of the LED strip being installed and select a compatible power supply with sufficient capacity. A suitable allowance above the calculated load is recommended.

5. What are the benefits of using an LED Strip Light Quick Connector?

LED Strip Light Quick Connectors help to:

  • Connect LED strip lights without soldering.
  • Save installation time.
  • Create a neat and convenient electrical connection.
  • Simplify repairs and replacement.
  • Reduce the need for specialised soldering equipment.

6. Can I install the LED Strip Light Quick Connector myself?

Yes, provided you follow the correct installation procedure and have basic electrical knowledge.

Always disconnect the power supply before working on the connection. Ensure the LED strip is compatible with the connector, the copper contacts are correctly aligned, and the connector is securely closed before reconnecting power.

7. Do you have DIY kits with everything included?

The quick connector is a connection accessory and does not include a complete LED lighting installation kit.

You will need a compatible LED strip light, suitable power supply, and the required wiring. Additional mounting accessories may also be needed depending on your application.

8. Can I get an electric shock from an LED Strip Light Quick Connector?

The connector itself is generally used on the low-voltage side of an LED installation. However, the power supply connects to mains electricity, which can cause serious electric shock.

Always:

  • Switch off and disconnect the power supply before installation or adjustment.
  • Never work on exposed wiring while the system is powered.
  • Never connect a low-voltage LED strip directly to 230V mains electricity.
  • Do not use damaged connectors, cables, or power supplies.
  • Ensure all connections are secure and correctly insulated.

9. Can the connector bend around corners or curved shapes?

The connector is designed to join an LED strip to wiring. The short cable section provides some flexibility when positioning the connection.

However, avoid sharp bends, excessive twisting, or pulling on the connector, as this may damage the wiring or loosen the electrical contacts.

10. Can I cut or shorten the LED Strip Light Quick Connector?

The connector should not be cut, shortened, or modified unless the manufacturer specifically confirms that it can be altered.

If additional cable length is required, use suitable extension wiring and an appropriate connection method.

11. How is the LED Strip Light Quick Connector installed?

The connector is installed directly onto a compatible LED strip light.

For the best installation:

  • Ensure the power supply is switched off and disconnected.
  • Confirm that the connector is suitable for the LED strip.
  • Open the connector housing.
  • Insert the LED strip, aligning the copper contacts correctly.
  • Close the connector securely.
  • Check the positive (+) and negative (–) wiring.
  • Reconnect the power supply and test the installation.

Avoid forcing the strip into the connector or pulling on the attached wires.

12. Can I dim LED strip lights connected using this quick connector?

The quick connector does not provide dimming functionality. Dimming depends on the LED strip, power supply, and compatible dimmer or controller being used.

Ensure all components are compatible before adding a dimmer or LED controller.

13. Can I use the LED Strip Light Quick Connector outdoors?

This depends on the IP rating of the connector and the rest of the installation.

The connector should not be exposed to rain, moisture, or damp conditions unless it is specifically rated and suitable for that environment.

For outdoor installations, ensure that all connections, wiring, and power supplies have appropriate weather protection.

14. Can I connect multiple LED strip lights using quick connectors?

Yes, multiple LED strip sections can be connected using suitable connectors and wiring, provided the installation is correctly designed.

Ensure that:

  • The connectors are compatible with the LED strip.
  • The power supply can handle the total wattage.
  • The wiring is suitable for the current load.
  • Correct polarity is maintained throughout the installation.
  • Voltage drop is considered on longer LED strip runs.

Do not exceed the ratings of the connector, wiring, or power supply.

LED Strip Light Quick Connector Installation & Setup

Installing an LED Strip Light Quick Connector is quick and straightforward, allowing you to connect compatible LED strips without soldering. Follow these simple steps for a secure and reliable connection.

Step 1: Prepare Your LED Strip

Ensure the LED strip is compatible with the connector. This connector is designed for 8mm wide strips with a thickness of 1.6mm.

Step 2: Prepare the Installation

Switch off and disconnect the LED power supply before starting installation. Ensure the LED strip and connector are clean and free from damage.

Step 3: Open the Connector

Carefully open the transparent connector housing to expose the contact terminals.

Step 4: Insert the LED Strip

Slide the LED strip into the connector, ensuring the copper contact points are correctly aligned with the internal metal terminals.

Step 5: Secure the Connection

Close the connector firmly to secure the LED strip and establish contact with the terminals.

Step 6: Connect the Power Wires

Connect the red and black wires to the corresponding positive (+) and negative (-) terminals, ensuring correct polarity.

Step 7: Test the Connection

Reconnect the compatible LED power supply and switch on the lights to check that the connection is working correctly.

Installation Tips

  • Always check connector compatibility before installation.
  • Ensure the LED strip is correctly aligned with the contact terminals.
  • Check positive and negative polarity.
  • Do not force the LED strip into the connector.
  • Ensure the connector is securely closed.
  • Avoid pulling or placing excessive tension on the wires.
  • Always disconnect power before adjusting the connection.
  • Do not exceed the connector's rated voltage and current.

Following these steps will help ensure a neat, secure and reliable solder-free connection for your LED strip lighting installation.

LED Strip Light Quick Connector Troubleshooting & Recommendations

Common Issues & Solutions

LED strip won't turn on

  • Check that the power supply is switched on and connected correctly.
  • Check that the positive (+) and negative (-) wires are correctly connected.
  • Ensure the LED strip is fully inserted into the connector.
  • Check that the copper contact points align with the connector terminals.

LED strip flickers

  • Check for loose connections inside the connector.
  • Ensure the connector is securely closed.
  • Inspect the wires for damage or poor contact.
  • Check that the power supply is compatible with the LED strip.

LED strip only works intermittently

  • Check for loose or misaligned contact points.
  • Ensure the connector is firmly attached to the LED strip.
  • Inspect the cable for damage or excessive pulling.

Recommendations

  • Always check connector compatibility before installation.
  • Ensure the connector matches the 8mm LED strip width and 1.6mm thickness.
  • Check positive and negative polarity.
  • Ensure the copper contacts are correctly aligned.
  • Avoid pulling or twisting the connecting wires.
  • Always disconnect power before adjusting the connector.
  • Replace damaged connectors rather than attempting makeshift repairs.

Following these recommendations will help maintain reliable electrical connections and consistent LED strip performance.


LED Strip Light Quick Connector Safety Tips

To ensure safe installation and reliable operation, follow these guidelines:

  • Always disconnect the power supply before installation or adjustments.
  • Never work on live electrical connections.
  • Use a compatible LED strip and power supply.
  • Check polarity before connecting power.
  • Do not force the LED strip into the connector.
  • Ensure the connector is securely closed.
  • Avoid exposing the connector to moisture unless suitably rated.
  • Do not exceed the connector's rated voltage or current.
  • Inspect connections regularly for damage or overheating.
  • Replace damaged connectors and wiring.

Following these precautions will help ensure safe operation and long-lasting performance.

LED Strip Light Quick Connector – Applications & Use Cases

LED Strip Light Quick Connectors provide a simple, solder-free solution for connecting LED strip lights to power cables.

Common applications include:

  • LED strip light installations
  • Signage and lightbox lighting
  • Cabinet and furniture lighting
  • Display and retail lighting
  • DIY LED projects
  • General decorative lighting

Ideal for quick, neat and reliable LED strip light connections.

LED Strip Light Quick Connector

Our LED Strip Light Quick Connectors provide a convenient and reliable solution for connecting LED strip lights without the need for soldering. Designed for quick and easy installation, these connectors feature a secure clip-in connection that helps simplify LED strip wiring and installation. Ideal for joining LED strip lights to power cables, they are suitable for DIY projects, signage, display lighting, cabinetry, furniture lighting and general LED lighting installations. Perfect for both professional installers and DIY enthusiasts, these connectors offer a neat, practical and time-saving solution for making reliable LED strip light connections.

Colours & Diagrams

led strip light corner connector

led strip light corner connector

Additional information

Weight0.01 kg
Dimensions10 × 1 × 1 cm

Specifications

Fresh Picks