Additional information
| Weight | 0.02 kg |
|---|---|
| Dimensions | 2 × 1 × 1 cm |
| Colour | Red, Blue, Green, Yellow, 3000K, 9000K-11000K |
Loading...
* Actual products may vary slightly due to continuous design enhancments.
What Power Supply Do I Need?
| Qty Of Modules | Power Supply Required |
| 0-125 | 36W Power Supply |
| 126-208 | 60W Power Supply |
| 209-416 | 120W Power Supply |
| 417-541 | 150W Power Supply |
| 542-750 | 200W Power Supply |
| 751-1580 | 400W Power Supply |
Essential Components
Essential Components for a 12V LED Module Installation
To ensure a safe, reliable, and long-lasting installation, you'll need the following components:
- 12V DC LED Power Supply – Converts mains power to 12V DC and should be sized with at least 20% spare capacity above the total module wattage.
- 12V LED Modules – Choose the appropriate wattage, brightness, beam angle, and colour temperature for your application.
- Low-Voltage Cable – Suitable cable for connecting the power supply to the LED modules.
- Wire Connectors or Terminal Blocks – Ensure secure and reliable electrical connections.
- Mounting Accessories – Use suitable adhesive, screws, or mounting clips depending on the application.
- Heat Shrink Tubing or Insulation – Protects wiring connections and helps prevent accidental shorts.
- LED Controller or Dimmer (Optional) – Allows brightness or colour control where compatible.
Using quality components and correctly sizing the power supply will help ensure consistent performance and extend the lifespan of your 12V LED Modules.
2LED Module 0.24W 120°
12V Various Colours 3yr
Online Price:
Original price was: R10.00.R9.00Current price is: R9.00. Vat Incl.
Unit: Each
| Input | 12V DC |
| Output | 0.24W |
| Lumens | 36lm |
| Beam Angle | 120° |
| Colour Temperature | Red, Blue, Green, Yellow, Orange, 9000K-11 000K |
| Maximum per String | 20 Modules |
| Dimensions | 28mm x 12mm x 4mm |
| Mounting | Double Sided Tape |
| IP Rating | IP20 (Not Waterproof) |
| Warranty | 3 Year |
40 in stock (can be backordered)
What Power Supply Do I Need?
| Qty Of Modules | Power Supply Required |
| 0-125 | 36W Power Supply |
| 126-208 | 60W Power Supply |
| 209-416 | 120W Power Supply |
| 417-541 | 150W Power Supply |
| 542-750 | 200W Power Supply |
| 751-1580 | 400W Power Supply |
Essential Components
Essential Components for a 12V LED Module Installation
To ensure a safe, reliable, and long-lasting installation, you'll need the following components:
- 12V DC LED Power Supply – Converts mains power to 12V DC and should be sized with at least 20% spare capacity above the total module wattage.
- 12V LED Modules – Choose the appropriate wattage, brightness, beam angle, and colour temperature for your application.
- Low-Voltage Cable – Suitable cable for connecting the power supply to the LED modules.
- Wire Connectors or Terminal Blocks – Ensure secure and reliable electrical connections.
- Mounting Accessories – Use suitable adhesive, screws, or mounting clips depending on the application.
- Heat Shrink Tubing or Insulation – Protects wiring connections and helps prevent accidental shorts.
- LED Controller or Dimmer (Optional) – Allows brightness or colour control where compatible.
Using quality components and correctly sizing the power supply will help ensure consistent performance and extend the lifespan of your 12V LED Modules.
Frequently Asked Questions
What accessories do I require for a basic LED Module installation?
For a basic installation you will generally require:
- 1 × LED Modules
- 1 × Compatible 12V DC Power Supply
- Power Cord
- 2-Core Flex Cable (if extending the distance between the power supply and modules)
- Wire Connectors (optional for tool-free connections)
Simply connect the LED Modules to the correct 12V Power Supply, check all connections, and then connect the power supply to the mains.
Are there any optional accessories I may need?
Depending on your installation, you may also require:
- Insulated 2-Core Flex Cable
- 2-Core Wire Connectors
- Waterproof Junction Boxes (for outdoor installations)
- Mounting Clips or Cable Ties
- Silicone Sealant (for additional weather protection where required)
What voltage power supply should I use?
Always use a 12V DC Power Supply with our 12V LED Modules.
Never connect LED Modules directly to 230V AC mains power.
How do I calculate the correct power supply size?
Calculate the required power using:
Number of LED Modules × Wattage per Module + 15%
Example:
- 20 Modules × 0.72W = 14.4W
- 14.4W + 15% = 16.6W
A 20W Power Supply would therefore be suitable.
Where are LED Modules commonly used?
LED Modules are commonly used for:
- 3D Channel Letters
- Lightboxes
- Signage
- Display Cabinets
- Retail Displays
- Architectural Lighting
- Backlit Acrylic Signs
Can I install LED Modules myself?
Yes. LED Modules are designed for simple installation and are suitable for DIY users and professional sign installers alike.
Always ensure the correct power supply is used and disconnect mains power before making any electrical connections.
Can I receive an electric shock?
It is highly unlikely to receive a dangerous electric shock from the low-voltage 12V DC output side of the Power Supply.
Always complete and check all connections before connecting the Power Supply to the mains.
Can LED Modules be used outdoors?
Yes, provided you choose LED Modules with the appropriate IP rating and use suitable waterproof connections and power supplies.
Always check the IP rating of the specific module before outdoor installation.
Can I cut or separate the LED Modules?
Yes. LED Modules are connected by wires and can be separated between each module to suit your installation.
Do not cut through the LED Module itself.
How are LED Modules mounted?
Most LED Modules feature high-quality double-sided adhesive tape on the back for easy installation.
For added security, particularly outdoors or in warm environments, screws, cable ties, or suitable silicone adhesive may also be used.
Can LED Modules be dimmed?
Yes. LED Modules can be dimmed using a compatible 12V PWM LED Dimmer.
Always ensure both the dimmer and Power Supply are correctly rated for the total wattage of your installation.
How far apart should LED Modules be spaced?
Spacing depends on the module's beam angle, brightness, and the depth of your sign or lightbox.
As a general guide:
- 60–100mm spacing for shallow channel letters
- 100–150mm spacing for deeper lightboxes
For the most even illumination, we recommend testing the layout before permanently mounting the modules.
Installation & Setup
12V LED Module Installation & Setup
Installing 12V LED Modules is straightforward when the correct components are used.
Step 1: Plan Your Installation
Determine the number of modules required and calculate the total wattage to select a suitable 12V DC power supply with at least 20% spare capacity.
Step 2: Prepare the Surface
Ensure the mounting surface is clean, dry, and free from dust or grease before installing the modules.
Step 3: Position the Modules
Arrange the modules evenly across the sign, display, or surface to achieve consistent and uniform illumination.
Step 4: Connect the Modules
Connect the modules to the 12V DC power supply, ensuring the correct polarity (+ and –). Follow the manufacturer's recommended maximum number of modules per string.
Step 5: Test Before Securing
Power the modules briefly to confirm that all units illuminate correctly before permanently fixing them in place.
Step 6: Secure the Modules
Use the supplied adhesive backing or suitable mounting method to securely attach the modules to the surface.
Step 7: Connect to Power
Connect the power supply to the mains according to local electrical regulations. If you're unsure about mains wiring, consult a qualified electrician.
Installation Tips
- Do not exceed the recommended maximum modules per string.
- Space modules evenly for consistent light distribution.
- Use suitable cable for the installation length and total load.
- Ensure the power supply has at least 20% spare capacity.
- Keep connections protected from moisture where required.
- For larger installations, split modules across multiple strings or power supplies.
Following these steps will help ensure reliable performance, even illumination, and a long service life from your 12V LED Modules.
Troubleshooting & Recommendations
Common Issues & Solutions
LED modules won't turn on
- Check that the power supply is providing 12V DC.
- Verify all wiring connections and polarity (+ and –).
- Ensure the power supply is switched on and correctly sized for the total load.
- Check that the modules are connected within the recommended string limit.
Modules are dim or unevenly lit
- The power supply may be undersized.
- Excessive voltage drop can occur with long cable runs.
- Check for loose, damaged, or undersized wiring.
- Ensure the modules are positioned correctly and spaced evenly.
Only some modules light up
- Check the wiring between the affected modules.
- Inspect for loose or damaged connections.
- Make sure the maximum recommended number of modules per string has not been exceeded.
- Test individual modules or strings to identify the faulty section.
Modules are flickering
- Check for loose electrical connections.
- Confirm the 12V power supply is stable and not overloaded.
- Inspect wiring for damage or poor connections.
- If using a controller or dimmer, ensure it is compatible with 12V LED Modules.
Uneven illumination
- Modules may be spaced too far apart.
- Reposition the modules to improve light distribution.
- Check that the correct module type and beam angle are being used for the application.
Recommendations
- Use a quality 12V DC LED power supply with at least 20% spare capacity.
- Never exceed the manufacturer's recommended maximum number of modules per string.
- Use suitable cable sizes for the total load and cable length.
- Distribute modules evenly to achieve consistent illumination.
- For larger installations, divide the modules across multiple strings or power supplies.
- Protect electrical connections from moisture where required.
- Always test the installation before permanently securing the modules.
- Disconnect the power before making any changes or servicing the installation.
12V LED Module Safety Tips
To ensure safe installation and reliable operation, follow these guidelines:
- Always disconnect the power before installing, connecting, or modifying LED modules.
- Only use a compatible 12V DC LED power supply correctly rated for the installation.
- Choose a power supply with at least 20% spare capacity.
- Observe the correct polarity (+ and –) when making connections.
- Never connect 12V LED Modules directly to 230V AC mains power.
- Do not exceed the recommended maximum modules per string.
- Use properly rated cables and secure all electrical connections.
- Keep connections properly insulated to prevent short circuits.
- Protect modules and connections from moisture when used in damp or outdoor environments.
- Ensure adequate ventilation around the power supply and do not cover it with insulation or other materials.
- Regularly inspect the installation for loose connections, damaged cables, or signs of overheating.
- If you're unsure about connecting the power supply to mains electricity, consult a qualified electrician.
Following these recommendations will help ensure safe installation, consistent illumination, and a long service life for your 12V LED Modules.
Applications & Use Cases
12V LED Modules are a versatile lighting solution designed for signage, displays, backlighting, and decorative applications. Their compact design and reliable illumination make them ideal for projects requiring flexible placement and even light distribution.
Common applications include:
- Signage and illuminated lettering
- Channel letters and 3D signs
- Lightbox and display backlighting
- Retail displays and shop fittings
- Cabinet and display lighting
- Architectural feature lighting
- DIY lighting projects
- Decorative and accent lighting
With their 12V design, LED Modules are easy to install and can be arranged in strings to suit different project sizes and lighting requirements.
About
Our 12V LED Modules deliver bright, reliable, and efficient illumination, making them ideal for signage, channel letters, display cabinets, architectural features, and other backlit applications. Designed for easy installation and consistent light output, these compact modules provide excellent coverage and flexibility for both decorative and functional lighting. With a range of beam angles, wattages, and module configurations available, you can choose the right solution for your specific lighting project.
Colours & Diagrams
LED Module Dimensions:
Color of LED Module
LED Module Installation
1 review for 2LED Module 0.24W 120°
Specifications
You may also need...
Online Price:
Original price was: R110.00.R98.00Current price is: R98.00. Vat Incl.Select options This product has multiple variants. The options may be chosen on the product page
Related products
Fresh Picks
3LED Module 1.5W 160°
Online Price:
Original price was: R8.00.R7.00Current price is: R7.00. Vat Incl.
Original price was: R8.00.R7.00Current price is: R7.00. Vat Incl.
LED Neon Flex 12Volt 7.2W 3 Year Warranty
Online Price:
Original price was: R124.00.R113.00Current price is: R113.00. Vat Incl.
Original price was: R124.00.R113.00Current price is: R113.00. Vat Incl.
Outdoor LED Strip Light COB 230V IP65 2 Year Warranty Various Colours
Online Price:
Original price was: R101.00.R92.00Current price is: R92.00. Vat Incl.
Original price was: R101.00.R92.00Current price is: R92.00. Vat Incl.
200W LED Driver Power Supply
Online Price:
Original price was: R494.00.R416.00Current price is: R416.00. Vat Incl.
Original price was: R494.00.R416.00Current price is: R416.00. Vat Incl.
30W LED Driver Power Supply
Online Price:
Original price was: R218.00.R183.00Current price is: R183.00. Vat Incl.
Original price was: R218.00.R183.00Current price is: R183.00. Vat Incl.
12V SMD LED S-Strip Lights
Online Price:
Original price was: R110.00.R98.00Current price is: R98.00. Vat Incl.
Original price was: R110.00.R98.00Current price is: R98.00. Vat Incl.
12V SMD LED S-Strip Lights
Online Price:
Original price was: R110.00.R98.00Current price is: R98.00. Vat Incl.
Original price was: R110.00.R98.00Current price is: R98.00. Vat Incl.
24V COB LED Strip Lights
Online Price:
Original price was: R60.00.R54.00Current price is: R54.00. Vat Incl.
Original price was: R60.00.R54.00Current price is: R54.00. Vat Incl.
PLUG WITH WIRE
Online Price:
Original price was: R75.00.R68.00Current price is: R68.00. Vat Incl.
Original price was: R75.00.R68.00Current price is: R68.00. Vat Incl.
3M Network Cable
Online Price:
Original price was: R70.00.R60.00Current price is: R60.00. Vat Incl.
Original price was: R70.00.R60.00Current price is: R60.00. Vat Incl.
Jesse –
great product, for inside its great, for outside, not so much