✅ Dos

🌓 Choose the Right Beam Angle & Color Temp
Select beam angles and color temperatures that suit the space — anti-glare fittings are often used in task or ambient lighting where visual comfort is key.

💡 Use Compatible Low-Glare LED Modules
Use LED light sources specifically designed for anti-glare fixtures (deep recessed, low UGR).

📏 Install at Correct Height & Spacing
Ensure placement supports the anti-glare effect — avoid over-spacing which can create dark patches.

🛠️ Secure the Fitting Properly
Install firmly with clips or brackets so the deep-recessed optics remain properly aligned.

❌ Don’ts 

🔦 Don’t Use Exposed or Bulging Lamps
Avoid using LED bulbs that protrude past the fixture edge — it defeats the anti-glare purpose.

⚠️ Don’t Assume All Anti-Glare Are the Same
UGR ratings and glare control vary — don’t mix different models without checking specs.

🔥 Don’t Block Ventilation Around the Fitting
Anti-glare housings often trap more heat due to deeper baffles — allow proper ventilation.

💧 Don’t Use in Wet/Damp Areas Unless Rated
Anti-glare designs often have open reflectors — ensure IP rating is suitable for bathrooms or exterior use.