✅ Dos 

🔘 Use Momentary (Bell Press) Switches
Ensure you’re using the correct momentary-type switch, not a latching (toggle) switch.

💡 Use Compatible Dimmable LED Lamps
Only use LEDs marked as dimmable — non-dimmable LEDs may flicker or fail.

⚙️ Pair with a Compatible Dimmer Module
Ensure your bell press switch is paired with a compatible LED dimmer (e.g., trailing edge or smart module).

📏 Follow Wiring Instructions Precisely
Install according to the manufacturer’s wiring diagram — polarity and load type matter.

❌ Don’ts 

⚡ Don’t Mix with Non-Momentary Switches
Do not use toggle, rocker, or push-on/push-off switches — these will not work properly with bell press dimmers.

🔄 Don’t Overload the Dimmer
Stay within the minimum and maximum LED wattage ratings — overloading can cause buzzing, flickering, or failure.

🚫 Don’t Use with Non-Dimmable LEDs
Even one non-dimmable bulb on a dimmable circuit can cause erratic performance.

💧 Don’t Install in Damp Areas Unless Rated
Use only in dry environments, unless the dimmer and switch are IP-rated for moisture.